Technical Values
WARNING: This page does not describe the selected car, but rather 9 other vehicles, including the 2013 Porsche 911, 2012 Porsche 911, 2011 Porsche 911, 2010 Porsche 911, and 2009 Porsche 911. However, it is still accessible from the selected car via links, so may be relevant.
| Location | Description | Type | Basic value | Tolerance 1 | Tolerance 2 |
|---|---|---|---|---|---|
| Mounting saddles and camshaft thrust bearings | M6 x 30 | Tightening torque | 13 Nm (9.5 ft. lb.) | ||
| Oil guide housing to camshaft | M5 | Tightening torque | 7 Nm (5 ft. lb.) | ||
| Guide rail | M6 x 25 | Tightening torque | 13 Nm (9.5 ft. lb.) | ||
| Chain tensioner cover | M6 | Tightening torque | 10 Nm (7.5 ft. lb.) | ||
| Camshaft actuator | M12 x 130 | Initial tightening | 50 Nm (37 ft. lb.) | ||
| Sprocket to outlet camshaft | M16 x 43 | Initial tightening | 30 Nm (22 ft. lb.) | ||
| Camshaft actuator | Torque angle | 110° | +/-5° | ||
| Sprocket to outlet camshaft | M16 x 43 | Torque angle | 90° | +/-5° |