LEMON Manuals: Even more car manuals for everyone
Home >> Porsche >> 2016 >> 911 Turbo, 2D Convertible >> Repair and Diagnosis >> External Pages >> Different car >> Section 131 (15 - Engine - Cylinder Head, Valve Control -- CARRERA (997)) >> WM 150319 Removing And Installing Camshaft Housing (Gt3, Gt3 RS & Gt3 RS 4.0) >> Technical Values

Technical Values

WARNING: This page does not describe the selected car, but rather 9 other vehicles, including the 2013 Porsche 911, 2012 Porsche 911, 2011 Porsche 911, 2010 Porsche 911, and 2009 Porsche 911. However, it is still accessible from the selected car via links, so may be relevant.
Location Description Type Basic value Tolerance 1 Tolerance 2
Camshaft housing to cylinder head M8 Initial tightening 23 Nm (17 ft. lb.)    
Camshaft housing to cylinder head M8 Final tightening 28 Nm (21 ft. lb.)    
scientia non olet · About LEMON Manuals