Preliminary Work

WARNING: This page does not describe the selected car, but rather 9 other vehicles, including the 2013 Porsche 911, 2012 Porsche 911, 2011 Porsche 911, 2010 Porsche 911, and 2009 Porsche 911. However, it is still accessible from the selected car via links, so may be relevant.

CAUTION: Ingress of dirt

Danger of material damage due to blocked oil bores/oil ducts.

→ Absolute cleanliness is essential when working on the engine.

→ Lay removed engine parts on a clean base and make sure to cover them.

→ Use the cover for dust protection when fitting the engine NR.165 on the engine assembly support.

Remove engine.
→ 100119 REMOVING AND INSTALLING ENGINE - GT2 RS .
Remove transmission.
→ 343527 REMOVING AND MOUNTING TRANSMISSION .
Secure the engine support to the engine/transmission flange with screw sleeves.
Secure the engine to the assembly support with an engine lift. Get another person to help you do this.
Remove rear silencers.
→ 263319 REMOVING AND INSTALLING REAR SILENCER .
Remove cover for camshaft housing.
→ 159119 REMOVING AND INSTALLING COVER FOR CAMSHAFT HOUSING - GT2 RS .
Remove camshafts.
→ 150520 REMOVING AND INSTALLING CAMSHAFTS (INCLUDES SETTING TIMING) - GT2 RS .