Removing and installing spray nozzle for headlight washing system: Installation
WARNING: This page does not describe the selected car, but rather 7 other vehicles, including the 2005 Porsche 911, 2004 Porsche 911, 2003 Porsche 911, 2002 Porsche 911, and 2001 Porsche 911. However, it is still accessible from the selected car via links, so may be relevant.
- Push hose as far as it will go onto the new spray nozzle and fasten the hose clamp.
- Reinstall new spray nozzle with holder in the same position. Tightening torque of the M6 hexagon nut 5 Nm (3.5 ftlb.)
- Push plug-in coupling to lock with an audible click, then check the locking with a slight pull.
- Install main headlight and check position of the spray nozzle in the cover trim. Remove the main headlight again and center the spray nozzle if necessary.
- Install main headlight, check it and perform a function test.