Removing and installing rear window wiper system: Installation

WARNING: This page does not describe the selected car, but rather 7 other vehicles, including the 2005 Porsche 911, 2004 Porsche 911, 2003 Porsche 911, 2002 Porsche 911, and 2001 Porsche 911. However, it is still accessible from the selected car via links, so may be relevant.

TIGHTENING TORQUES - REAR WINDOW WIPER SYSTEM

Component	Thread	Tightening torques:
Hexagon nuts	M6	8 Nm (6 ftlb.)
Hexagon-head bolt	M6	8 Nm (6 ftlb.)
Wiper arm nut	M8	17 Nm (12.5 ftlb.)

NOTE:

The spoiler edge on the rear-window wiper blade must face outwards.