Technical Values
WARNING: This page does not describe the selected car, but rather 9 other vehicles, including the 2013 Porsche 911, 2012 Porsche 911, 2011 Porsche 911, 2010 Porsche 911, and 2009 Porsche 911. However, it is still accessible from the selected car via links, so may be relevant.
| Location | Description | Type | Basic value | Tolerance 1 | Tolerance 2 |
|---|---|---|---|---|---|
| M8 Torx screws securing hydraulic pump to housing | Front | Tightening torque | 23 Nm (17 ftlb.) | ||
| M6 Torx screw securing hydraulic pump holder to housing | Back | Tightening torque | 10 Nm (7.5 ftlb.) | ||
| Pressure line to hydraulic pump | When loosening and tightening, counter at the connection piece (a/f 27 mm) | Tightening torque | 35 Nm (26 ftlb.) |