Technical Values
WARNING: This page does not describe the selected car, but rather 9 other vehicles, including the 2013 Porsche 911, 2012 Porsche 911, 2011 Porsche 911, 2010 Porsche 911, and 2009 Porsche 911. However, it is still accessible from the selected car via links, so may be relevant.
| Location | Description | Type | Basic value | Tolerance 1 | Tolerance 2 |
|---|---|---|---|---|---|
| Short pressure line (adapter) to hydraulic pump | M16 x 1.5 | Tightening torque | 35 Nm (26 ftlb.) | ||
| Fastening screws on pump | M8 Torx | Tightening torque | 23 Nm (17 ftlb.) | ||
| Fastening screw on pump | M6 Torx | Tightening torque | 10 Nm (7.5 ftlb.) | ||
| Fastening screws securing reservoir | M8 Torx | Tightening torque | 23 Nm (17 ftlb.) | ||
| Fastening screw securing reservoir | M6 Torx | Tightening torque | 10 Nm (7.5 ftlb.) | ||
| Pressure line to upper part of reservoir | M10 x 1 | Tightening torque | 13 Nm (9.5 ftlb.) | ||
| Pressure line to upper part of reservoir | M12 x 1 | Tightening torque | 20 Nm (15 ftlb.) | ||
| Plug-in coupling on pressure line | M16 | Tightening torque | 30 Nm (22 ftlb.) |