LEMON Manuals: Even more car manuals for everyone
Home >> Porsche >> 2016 >> 911 Turbo, 2D Convertible >> Repair and Diagnosis >> External Pages >> Different car >> Section 128 (48 - Steering -- CARRERA (997)) >> WM 489019 Removing And Installing Power-Steering Gear (Except CARR. GTS Coupe, CARRERA Black Edition, CARR. Coupe "Edition Style", CARR. GTS CABRIO, CARRERA CABRIO Black Edition, CARR. CABRIO "Edition Style", Turbo S Coupe "Ed. 918 SPYDER", CARRERA 4 GTS, Turbo S CABRIO "Ed. 918 SPYDER", CARRERA 4 GTS CABRIO, Gt2 RS, Gt3 RS 4.0) >> Notes For Sliding Piece And Airbag Contact Unit

Notes For Sliding Piece And Airbag Contact Unit

WARNING: This page does not describe the selected car, but rather 9 other vehicles, including the 2013 Porsche 911, 2012 Porsche 911, 2011 Porsche 911, 2010 Porsche 911, and 2009 Porsche 911. However, it is still accessible from the selected car via links, so may be relevant.

If the sliding piece -1-  was pulled off the steering shaft -4-  , the notch -2-  must point towards the tooth gap -3-  during assembly.

Fig 1: Identifying Sliding Piece
G09826372Courtesy of PORSCHE CARS NORTH AMERICA, INC.

If the steering wheel was not fixed before the steering gear was removed, the position of the contact unit (spring) may no longer be correct. In this case, remove steering wheel and move contact unit to center position because otherwise the spring will be damaged.