WM 481255 Replacing Steering Wheel Cover And PDK Rocker Switches (Module) (Except CARR. GTS Coupe, CARRERA Black Edition, CARR. Coupe "Edition Style", CARR. GTS CABRIO, CARRERA CABRIO Black Edition, CARR. CABRIO "Edition Style", Turbo S Coupe "Ed. 918 SPYDER", CARRERA 4 GTS, Turbo S CABRIO "Ed. 918 SPYDER", CARRERA 4 GTS CABRIO, Gt3, Gt2, Gt3 RS, Gt2 RS, Gt3 RS 4.0): Information: Notes
WARNING: This page does not describe the selected car, but rather 9 other vehicles, including the 2013 Porsche 911, 2012 Porsche 911, 2011 Porsche 911, 2010 Porsche 911, and 2009 Porsche 911. However, it is still accessible from the selected car via links, so may be relevant.
Information
- On the 911 Turbo, Porsche Doppelkupplung (PDK), in conjunction with the PDK steering wheel, is only used from model year 2010 onwards. For this reason, the description "Replacing steering wheel trim and rocker switches" only applies to the 911 Turbo from model year 2010.
- The rocker switches -4- for the PDK steering wheel can only be replaced together with the steering wheel cover. For a perfect fit, the inside of the steering wheel trim is greased at two places and is also bonded to the steering wheel at six places. When fitting the steering wheel trim for the first time, a two-component adhesive set (Porsche Part No. 000.043.207.48) must be used.