LEMON Manuals: Even more car manuals for everyone
Home >> Porsche >> 2016 >> 911 Turbo, 2D Convertible >> Repair and Diagnosis >> External Pages >> Different car >> Section 128 (48 - Steering -- CARRERA (997)) >> WM 480819 Removing And Installing ELV Control Unit (Except Turbo S Coupe "Ed. 918 SPYDER", CARRERA 4 GTS, Turbo S CABRIO "Ed. 918 SPYDER", CARRERA 4 GTS CABRIO, Gt3 RS 4.0) >> Preliminary Work >> Preliminary Work For ELV Control Unit

Preliminary Work For ELV Control Unit

WARNING: This page does not describe the selected car, but rather 9 other vehicles, including the 2013 Porsche 911, 2012 Porsche 911, 2011 Porsche 911, 2010 Porsche 911, and 2009 Porsche 911. However, it is still accessible from the selected car via links, so may be relevant.
  1. If the ELV (electronic steering column lock) control unit has to be replaced, the values must be read out using PIWIS Tester II 9818  before removing the control unit. See section entitled PROGRAMMING ELV CONTROL UNIT .
  2. Insert ignition key into the ignition lock. The electronic steering column lock (ELV) must unlock.
  3. Disconnect the battery.
  4. Remove the steering column. → 481519 REMOVING AND INSTALLING STEERING COLUMN 
scientia non olet · About LEMON Manuals