Tightening Torques For Hydraulic Pump (Power-Steering Pump)
WARNING: This page does not describe the selected car, but rather 9 other vehicles, including the 2013 Porsche 911, 2012 Porsche 911, 2011 Porsche 911, 2010 Porsche 911, and 2009 Porsche 911. However, it is still accessible from the selected car via links, so may be relevant.
| Location | Description | Type | Basic value | Tolerance 1 | Tolerance 2 |
|---|---|---|---|---|---|
| Hydraulic pump (power-steering pump) mounting, M8 | Also applies as of MY 2009 | Tightening torque | 23 Nm (17 ftlb.) | ||
| Pump support to hydraulic pump (power-steering pump), M8 | As of MY 2009 | Tightening torque | 23 Nm (17 ftlb.) | ||
| Pump support from hydraulic pump (power-steering pump) to crankcase, M6 | As of MY 2009 | Tightening torque | 13 Nm (9.5 ftlb.) | ||
| Pulley to hydraulic pump (power-steering pump), M8 | Also applies as of MY 2009 | Tightening torque | 23 Nm (17 ftlb.) | ||
| Pressure line to hydraulic pump (power-steering pump), M16 x 1.5 | Up to MY 2008 | Tightening torque | 35 Nm (26 ftlb.) | ||
| Pressure line to hydraulic pump (power-steering pump), M16 x 1.5 | As of MY 2009 | Tightening torque | 30 Nm (22 ftlb.) | ||
| Reservoir mount for hydraulic pump (power-steering pump), M8 | 911 Turbo and 911 GT3/GT2 | Tightening torque | 23 Nm (17 ftlb.) | ||
| Reservoir mount for hydraulic pump (power-steering pump), M6 | 911 Turbo and 911 GT3/GT2 | Tightening torque | 10 Nm (7.5 ftlb.) | ||
| Clutch pressure lines to reservoir for hydraulic pump (power-steering pump), M12 x 1 | 911 Turbo with manual transmission | Tightening torque | M12=20 Nm (15 ftlb.) | ||
| Clutch pressure lines to reservoir for hydraulic pump (power-steering pump), M10 x 1 | 911 Turbo with manual transmission | Tightening torque | M10=13 Nm (9.5 ftlb.) |