Technical Values
WARNING: This page does not describe the selected car, but rather 9 other vehicles, including the 2013 Porsche 911, 2012 Porsche 911, 2011 Porsche 911, 2010 Porsche 911, and 2009 Porsche 911. However, it is still accessible from the selected car via links, so may be relevant.
| Location | Description | Type | Basic value | Tolerance 1 | Tolerance 2 |
|---|---|---|---|---|---|
| Stud on front-axle cross member | Tightening torque | 20 Nm (15 ft. lb.) | |||
| Nuts on studs | Tightening torque | 65 Nm (48 ft. lb.) | |||
| Screws for support for final drive | Tightening torque | 65 Nm (48 ft. lb.) | |||
| Drive shafts | Fastening screws between drive shaft and transmission flange | Tightening torque | 39 Nm (29 ft. lb.) | ||
| Retaining strap securing cover to body | Tightening torque | 23 Nm (17 ft. lb.) | |||
| Diagonal brace to body | Tightening torque | 100 Nm (74 ft. lb.) |