Removing Sealing Ring For Cardan Flange

WARNING: This page does not describe the selected car, but rather 9 other vehicles, including the 2013 Porsche 911, 2012 Porsche 911, 2011 Porsche 911, 2010 Porsche 911, and 2009 Porsche 911. However, it is still accessible from the selected car via links, so may be relevant.

Remove sealing ring for cardan flange.
1. 1.1. Make a hole in the sealing ring using a suitable tool, e.g. a pointed drift.
  
  Fig 1: Making Hole In Sealing Ring
  Courtesy of PORSCHE CARS NORTH AMERICA, INC.
2. 1.2. Screw a tapping screw approx. 1 cm into the sealing ring.
  
  Fig 2: Identifying Screw In Sealing Ring
  Courtesy of PORSCHE CARS NORTH AMERICA, INC.
3. 1.3. Knock out sealing ring on screw using Slide Hammer Kit Nr. 168 .
  
  Fig 3: Tapping Out Sealing Ring
  Courtesy of PORSCHE CARS NORTH AMERICA, INC.