Installing Sealing Ring For Cardan Flange

WARNING: This page does not describe the selected car, but rather 9 other vehicles, including the 2013 Porsche 911, 2012 Porsche 911, 2011 Porsche 911, 2010 Porsche 911, and 2009 Porsche 911. However, it is still accessible from the selected car via links, so may be relevant.

Install sealing ring for cardan flange.
1. 1.1. Fill the space between the dust and sealing lips -arrow- on the new sealing ring with grease, e.g. Liqui-Moly.
  
  Fig 1: Locating Grease On Sealing Ring
  Courtesy of PORSCHE CARS NORTH AMERICA, INC.
2. 1.2. Tap sealing ring into the transmission as far as the mounting face using Pressure Piece 9790 .
  
  Fig 2: Tapping In Sealing Ring
  Courtesy of PORSCHE CARS NORTH AMERICA, INC.