Removing Cardan Flange - Automatic Transmission

WARNING: This page does not describe the selected car, but rather 9 other vehicles, including the 2013 Porsche 911, 2012 Porsche 911, 2011 Porsche 911, 2010 Porsche 911, and 2009 Porsche 911. However, it is still accessible from the selected car via links, so may be relevant.

Set selector lever to P and firmly apply the handbrake.
Loosen and unscrew collar nut using Socket Wrench 9669 .

Fig 1: Removing Collar Nut
Courtesy of PORSCHE CARS NORTH AMERICA, INC.
Pull off cardan flange using Three-Arm Puller: Span Width 100 mm, Span Depth 100 mm Nr. 112-1 .

Fig 2: Pulling Off Cardan Flange
Courtesy of PORSCHE CARS NORTH AMERICA, INC.