LEMON Manuals: Even more car manuals for everyone
Home >> Porsche >> 2016 >> 911 Turbo, 2D Convertible >> Repair and Diagnosis >> External Pages >> Different car >> Section 122 (39 - Final Drive - Differential, Differential Lock -- CARRERA (997)) >> WM 396419 Removing And Installing CARDAN Flange (Turbo Coupe & Turbo CABRIO) >> Installing Cardan Flange >> Installing Cardan Flange - Automatic Transmission

Installing Cardan Flange - Automatic Transmission

WARNING: This page does not describe the selected car, but rather 9 other vehicles, including the 2013 Porsche 911, 2012 Porsche 911, 2011 Porsche 911, 2010 Porsche 911, and 2009 Porsche 911. However, it is still accessible from the selected car via links, so may be relevant.
  1. Replace O-ring for cardan flange.
  2. Screw on new collar nut and tighten using Socket Wrench 9669  .
    Location Description Type Basic value Tolerance 1 Tolerance 2
    Collar nut for cardan flange   Tightening torque 160 Nm (118 ft. lb.)    
  3. Lock nut by pressing in the collar.
    Fig 1: Pressing Collar In Nut
    G09825368Courtesy of PORSCHE CARS NORTH AMERICA, INC.
scientia non olet · About LEMON Manuals