Installing Front Halfshaft Flange

WARNING: This page does not describe the selected car, but rather 9 other vehicles, including the 2013 Porsche 911, 2012 Porsche 911, 2011 Porsche 911, 2010 Porsche 911, and 2009 Porsche 911. However, it is still accessible from the selected car via links, so may be relevant.

Replace circlip for the halfshaft flange. To do this, clamp the flange in the vice with a hexagon-head bolt -B- and press the circlip out with the new circlip -A- .

Fig 1: Replacing Halfshaft Flange Circlip
Courtesy of PORSCHE CARS NORTH AMERICA, INC.
Grease circlip for easier fitting.
Drive halfshaft flange into transmission using a rubber hammer.

Fig 2: Tapping In Halfshaft Flange
Courtesy of PORSCHE CARS NORTH AMERICA, INC.