Removing Cover For Final Drive

WARNING: This page does not describe the selected car, but rather 9 other vehicles, including the 2013 Porsche 911, 2012 Porsche 911, 2011 Porsche 911, 2010 Porsche 911, and 2009 Porsche 911. However, it is still accessible from the selected car via links, so may be relevant.

Remove Halfshaft Flange.
Lever Off Halfshaft Flange With A Mounting Lever And Pull It Out.

Fig 1: Removing Halfshaft Flange
Courtesy of PORSCHE CARS NORTH AMERICA, INC.
Remove Cover For Final Drive.
1. 2.1. Unscrew Screws -2- Between Cover For Final Drive -1- And Final Drive.
  
  Fig 2: Identifying Final Drive Cover Screws
  Courtesy of PORSCHE CARS NORTH AMERICA, INC.
2. 2.2. Loosen Cover For Final Drive -1- By Tapping It With A Rubber Hammer If Necessary, And Remove It.