Installing Left Halfshaft Flange
WARNING: This page does not describe the selected car, but rather 9 other vehicles, including the 2013 Porsche 911, 2012 Porsche 911, 2011 Porsche 911, 2010 Porsche 911, and 2009 Porsche 911. However, it is still accessible from the selected car via links, so may be relevant.
- Install halfshaft flange.
Information
Always replace screw for the halfshaft flange.
Insert halfshaft flange -2- and screw in and tighten screw -1- .
Screw for halfshaft flange → Tightening torque: 44 Nm (33 ft. lb.)