Installing Sealing Ring For Halfshaft Flange
WARNING: This page does not describe the selected car, but rather 9 other vehicles, including the 2013 Porsche 911, 2012 Porsche 911, 2011 Porsche 911, 2010 Porsche 911, and 2009 Porsche 911. However, it is still accessible from the selected car via links, so may be relevant.
Information
The sealing ring must fit in the transmission housing at the same depth all round.
- Thinly coat sealing lip and outer circumference of sealing ring with Vaseline and insert sealing ring as far as it will go using Pressure Piece 9252 .