Installing Sealing Ring For Right Halfshaft Flange

WARNING: This page does not describe the selected car, but rather 9 other vehicles, including the 2013 Porsche 911, 2012 Porsche 911, 2011 Porsche 911, 2010 Porsche 911, and 2009 Porsche 911. However, it is still accessible from the selected car via links, so may be relevant.

Fit sealing ring.
1. 1.1. Thinly coat the outer circumference and sealing lip of the sealing ring with Vaseline and place sealing ring on the pressure piece 9252 .
  
  Fig 1: Tapping In Sealing Ring
  Courtesy of PORSCHE CARS NORTH AMERICA, INC.
2. 1.2. Tap sealing ring in as far as the mounting face.
Install halfshaft flange.

Fig 2: Installing Halfshaft Flange With Mounting Screw
Courtesy of PORSCHE CARS NORTH AMERICA, INC.

Information

Always replace screw for the halfshaft flange.

Insert halfshaft flange -2- and screw in and tighten screw -1- .

→ Tightening torque: 44 Nm (33 ft. lb.)