LEMON Manuals: Even more car manuals for everyone
Home >> Porsche >> 2016 >> 911 Turbo, 2D Convertible >> Repair and Diagnosis >> External Pages >> Different car >> Section 122 (39 - Final Drive - Differential, Differential Lock -- CARRERA (997)) >> 392219 - Removing And Installing Sealing Ring For Short HALFSHAFT Flange (CARR. Coupe, CARR. S Coupe, CARR. CABRIO, CARR. S CABRIO, "Sport Classic", CARR. 4 Coupe, CARR. 4S Coupe, TARGA 4, TARGA 4S, CARR. 4 CABRIO, CARR. 4S CABRIO, CARR. GTS Coupe, CARR. GTS CABRIO & Speedster >> Subsequent Work

Subsequent Work

WARNING: This page does not describe the selected car, but rather 9 other vehicles, including the 2013 Porsche 911, 2012 Porsche 911, 2011 Porsche 911, 2010 Porsche 911, and 2009 Porsche 911. However, it is still accessible from the selected car via links, so may be relevant.
  1. Install short drive shaft flange.

    → 392519 REMOVING AND INSTALLING SHORT DRIVE SHAFT FLANGE  - section on "Installing"

  2. Fit right rear wheel.

    → 440519 REMOVING AND INSTALLING WHEEL - Installing

  3. Check transmission oil level in the final drive and top up if necessary.

    → 399035 CHECKING AND TOPPING UP OIL FOR FINAL DRIVE 

scientia non olet · About LEMON Manuals