Installing Sealing Ring For Left Halfshaft Flange

WARNING: This page does not describe the selected car, but rather 9 other vehicles, including the 2013 Porsche 911, 2012 Porsche 911, 2011 Porsche 911, 2010 Porsche 911, and 2009 Porsche 911. However, it is still accessible from the selected car via links, so may be relevant.

Screw M10 x 30 hexagon-head bolt into side B of Pressure Piece 9734 .

Fig 1: Identifying Hexagon-Head Bolt
Courtesy of PORSCHE CARS NORTH AMERICA, INC.
Thinly coat sealing lip and outer circumference of sealing ring with Vaseline and place the sealing ring on side A of Pressure Piece 9734 .

Fig 2: Installing Sealing Ring On Special Tool
Courtesy of PORSCHE CARS NORTH AMERICA, INC.
Hammer the sealing ring along with Pressure Piece 9734 completely into the transmission cover by hitting the hexagon-head bolt.

Fig 3: Identifying Pressure Piece Bolt
Courtesy of PORSCHE CARS NORTH AMERICA, INC.