Technical Values
WARNING: This page does not describe the selected car, but rather 9 other vehicles, including the 2013 Porsche 911, 2012 Porsche 911, 2011 Porsche 911, 2010 Porsche 911, and 2009 Porsche 911. However, it is still accessible from the selected car via links, so may be relevant.
| Location | Description | Type | Basic value | Tolerance 1 | Tolerance 2 |
|---|---|---|---|---|---|
| Position of unit lifting platform with respect to engine | Position of unit lifting platform with respect to engine | Adjustment value | 10° | ||
| Nut securing gear support to body | M10 | Tightening torque | 65 Nm (48 ft. lb.) | ||
| Screw securing gear support to transmission mount | M12 | Tightening torque | 120 Nm (89 ft. lb.) | ||
| Nut securing B+ cable to cable duct | M8 | Tightening torque | 23 Nm (17 ft. lb.) | ||
| Screws securing cross member to carrier side section | M12 | Tightening torque | 110 Nm (81.5 ft. lb.) | ||
| Screws securing diagonal brace to cross member | M12 | Tightening torque | 100 Nm (74 ft. lb.) | ||
| Screws securing diagonal brace to body | M10 | Tightening torque | 65 Nm (48 ft. lb.) | ||
| Screws securing transverse strut to carrier side section | M10 | Tightening torque | 65 Nm (48 ft. lb.) |