Technical Values
WARNING: This page does not describe the selected car, but rather 9 other vehicles, including the 2013 Porsche 911, 2012 Porsche 911, 2011 Porsche 911, 2010 Porsche 911, and 2009 Porsche 911. However, it is still accessible from the selected car via links, so may be relevant.
| Location | Description | Type | Basic value | Tolerance 1 | Tolerance 2 |
|---|---|---|---|---|---|
| Screw securing Porsche Doppelkupplung to engine housing | M12 | Tightening torque | 85 Nm (63 ft. lb.) | ||
| Screws securing speed sender to Porsche Doppelkupplung | M6 | Tightening torque | 10 Nm (7.5 ft. lb.) | ||
| Screw securing water tubes to Porsche Doppelkupplung | M6 | Tightening torque | 10 Nm (7.5 ft. lb.) | ||
| Screws securing B+ cable duct to Porsche Doppelkupplung | M6 | Tightening torque | 10 Nm (7.5 ft. lb.) |