Installing the car radio

WARNING: This page does not describe the selected car, but rather 7 other vehicles, including the 2005 Porsche 911, 2004 Porsche 911, 2003 Porsche 911, 2002 Porsche 911, and 2001 Porsche 911. However, it is still accessible from the selected car via links, so may be relevant.

Before the new car radio is installed, release and unplug the protective plug -A- for the optical waveguide.

Fig 1: Unplugging Protective Plug For The Optical Waveguide
Courtesy of PORSCHE OF NORTH AMERICA, INC.
Press in electrical plug and the optical waveguide plug on car radio until it is felt to engage -a- .

Fig 2: Engaging Electrical Plug & Optical Waveguide On Car Radio
Courtesy of PORSCHE OF NORTH AMERICA, INC.
NOTE:
- Before the car radio is inserted into the installation slot, it must be ensured that the electrical lines are not squeezed and damaged by the car radio.
Push the car radio into the installation slot until the locking elements on the radio housing engage.