Installing subwoofer

WARNING: This page does not describe the selected car, but rather 7 other vehicles, including the 2005 Porsche 911, 2004 Porsche 911, 2003 Porsche 911, 2002 Porsche 911, and 2001 Porsche 911. However, it is still accessible from the selected car via links, so may be relevant.

NOTE: State of the insulating mat between subwoofer and floor pan. Insulating mat must cover floor pan.

Insert the plug until it engages.

Fig 1: Installing Subwoofer Plug
Courtesy of PORSCHE OF NORTH AMERICA, INC.
Insert peg -2- of subwoofer into the floor pan and press subwoofer against the centre console.

Fig 2: Inserting Peg Of Subwoofer Into Floor Pan
Courtesy of PORSCHE OF NORTH AMERICA, INC.
Make sure that the vent -3- is routed above the subwoofer.

Fig 3: Installing Vent Above Subwoofer
Courtesy of PORSCHE OF NORTH AMERICA, INC.
Screw in and tighten both fastening screws -1- . See Fig 3 . Tightening torque 7.2 Nm (5.5 ftlb.).
Push carpet lining -arrow- behind the subwoofer. See Fig 3 .