LEMON Manuals: Even more car manuals for everyone
Home >> Porsche >> 2016 >> 911 Turbo, 2D Convertible >> Repair and Diagnosis >> External Pages >> Different car >> Section 12 (Radio - 911 CARRERA (996)) >> Removing and installing sensor for ParkAssistent >> Removal

Removing and installing sensor for ParkAssistent: Removal

WARNING: This page does not describe the selected car, but rather 7 other vehicles, including the 2005 Porsche 911, 2004 Porsche 911, 2003 Porsche 911, 2002 Porsche 911, and 2001 Porsche 911. However, it is still accessible from the selected car via links, so may be relevant.
  1. Take off rear spoiler. Pull off electrical plug connection. Press together retaining spring at top and pull off.
    Fig 1: Removing Retaining ParkAssistent Spring
    G03063495Courtesy of PORSCHE OF NORTH AMERICA, INC.
  2. Slightly bend up the holding peg on the sensor housing and push out the sensor.
    Fig 2: Removing Sensor
    G03063496Courtesy of PORSCHE OF NORTH AMERICA, INC.
  3. The washer remains over the sensor housing on the rear spoiler. Remove isolating ring from the sensor.
scientia non olet · About LEMON Manuals