LEMON Manuals: Even more car manuals for everyone
Home >> Porsche >> 2016 >> 911 Turbo, 2D Convertible >> Repair and Diagnosis >> External Pages >> Different car >> Section 12 (Radio - 911 CARRERA (996)) >> Removing and installing sensor for ParkAssistent >> Parking assistant wiring harness

Parking assistant wiring harness

WARNING: This page does not describe the selected car, but rather 7 other vehicles, including the 2005 Porsche 911, 2004 Porsche 911, 2003 Porsche 911, 2002 Porsche 911, and 2001 Porsche 911. However, it is still accessible from the selected car via links, so may be relevant.
NOTE:
  • The wiring harness is marked at one outer end of the plug connection. Observe the allocation of the plug connections to the sensors. Outer plug connection with marking (white adhesive tape) on the wiring harness always connected to outer left sensor.
Fig 1: Identifying Parking Assistant Wiring Harness
G03063498Courtesy of PORSCHE OF NORTH AMERICA, INC.

Pull of plug connection on the sensor. 

Lift the lower lug with your finger and pull off the plug connection.

Fig 2: Pulling Off Plug Connection
G03063499Courtesy of PORSCHE OF NORTH AMERICA, INC.