LEMON Manuals: Even more car manuals for everyone
Home >> Porsche >> 2016 >> 911 Turbo, 2D Convertible >> Repair and Diagnosis >> External Pages >> Different car >> Section 12 (Radio - 911 CARRERA (996)) >> Removing and installing sensor for ParkAssistent >> ParkAssistent control module

ParkAssistent control module

WARNING: This page does not describe the selected car, but rather 7 other vehicles, including the 2005 Porsche 911, 2004 Porsche 911, 2003 Porsche 911, 2002 Porsche 911, and 2001 Porsche 911. However, it is still accessible from the selected car via links, so may be relevant.
NOTE: The control module is fastened next to the alarm system/central locking system control module under the driver's seat. When removing, remove the seat and detach the retaining plate (two hexagon-head screws M6 x 16).
Fig 1: Identifying Park Assistant Control Module & Screws
G03063500Courtesy of PORSCHE OF NORTH AMERICA, INC.