Removing and installing sensor for ParkAssistent: Notes

WARNING: This page does not describe the selected car, but rather 7 other vehicles, including the 2005 Porsche 911, 2004 Porsche 911, 2003 Porsche 911, 2002 Porsche 911, and 2001 Porsche 911. However, it is still accessible from the selected car via links, so may be relevant.

NOTE:

Four sensors for the ParkAssistent are installed in the rear spoiler. The rear spoiler must be taken off in order to remove a defective sensor. The sensors are arranged in the order: outer left, inner left, inner right and outer right.

Fig 1: Identifying Park Assistant Sensors In Rear Spoiler

Courtesy of PORSCHE OF NORTH AMERICA, INC.

The sensor with holder in the rear spoiler consists of six parts.

Fig 2: Identifying Components Of Rear Spoiler Sensor

Courtesy of PORSCHE OF NORTH AMERICA, INC.

Rosette
Washer
Sensor housing
Isolating ring
Sensor
Retaining spring