LEMON Manuals: Even more car manuals for everyone
Home >> Porsche >> 2016 >> 911 Turbo, 2D Convertible >> Repair and Diagnosis >> External Pages >> Different car >> Section 12 (Radio - 911 CARRERA (996)) >> Removing and installing display and operator control unit (PCM) >> Removing display and operator control unit (PCM)

Removing display and operator control unit (PCM)

WARNING: This page does not describe the selected car, but rather 7 other vehicles, including the 2005 Porsche 911, 2004 Porsche 911, 2003 Porsche 911, 2002 Porsche 911, and 2001 Porsche 911. However, it is still accessible from the selected car via links, so may be relevant.
  1. Unclip the -switch covers-  from below and let them dangle from the electric leads.
    Fig 1: Unclipping Switch Covers
    G03063501Courtesy of PORSCHE OF NORTH AMERICA, INC.
  2. Press together both spring clamps on the display and operator control unit and carefully pull out.
    Fig 2: Pressing Together Spring Clamps On Display
    G03063502Courtesy of PORSCHE OF NORTH AMERICA, INC.
  3. Disconnect electrical plug connections from the display and operator control unit.
scientia non olet · About LEMON Manuals