LEMON Manuals: Even more car manuals for everyone
Home >> Porsche >> 2016 >> 911 Turbo, 2D Convertible >> Repair and Diagnosis >> External Pages >> Different car >> Section 12 (Radio - 911 CARRERA (996)) >> Removing and installing display and operator control unit (PCM) >> Installing display and operator control unit (PCM) >> Notes

Installing display and operator control unit (PCM): Notes

WARNING: This page does not describe the selected car, but rather 7 other vehicles, including the 2005 Porsche 911, 2004 Porsche 911, 2003 Porsche 911, 2002 Porsche 911, and 2001 Porsche 911. However, it is still accessible from the selected car via links, so may be relevant.
NOTE:
  • After installation of a new display and operator control unit, the system must be activated with the Porsche System Tester 2!
  1. Engage the electrical plug connections and carefully lay the electrical leads (do not pinch).
  2. Connect and switch on the Porsche System Tester 2.
scientia non olet · About LEMON Manuals