LEMON Manuals: Even more car manuals for everyone
Home >> Porsche >> 2016 >> 911 Turbo, 2D Convertible >> Repair and Diagnosis >> External Pages >> Different car >> Section 12 (Radio - 911 CARRERA (996)) >> Removing and installing display and operator control unit (PCM) >> Installing display and operator control unit (PCM) >> Connecting and switching on the Porsche System Tester 2

Connecting and switching on the Porsche System Tester 2

WARNING: This page does not describe the selected car, but rather 7 other vehicles, including the 2005 Porsche 911, 2004 Porsche 911, 2003 Porsche 911, 2002 Porsche 911, and 2001 Porsche 911. However, it is still accessible from the selected car via links, so may be relevant.
  1. Switch ignition on.
  2. Switch on PCM by pressing the volume control (display remains dark).
  3. Establish communication with the Porsche System Tester 2 and select PCM.
  4. Select Modify coding.
  5. Select PCM active.
  6. Confirm PCM active with the F8 key.
scientia non olet · About LEMON Manuals