LEMON Manuals: Even more car manuals for everyone
Home >> Porsche >> 2016 >> 911 Turbo, 2D Convertible >> Repair and Diagnosis >> External Pages >> Different car >> Section 12 (Radio - 911 CARRERA (996)) >> Removing and installing control unit for the telephone, - as of MY 2002 >> Removing control unit for telephone

Removing control unit for telephone

WARNING: This page does not describe the selected car, but rather 7 other vehicles, including the 2005 Porsche 911, 2004 Porsche 911, 2003 Porsche 911, 2002 Porsche 911, and 2001 Porsche 911. However, it is still accessible from the selected car via links, so may be relevant.
  1. Unscrew the 4 fastening screws from the holder.
    Fig 1: Unscrewing Control Unit For Telephone Fastening Screws From Holder (As Of MY 2002)
    G03063546Courtesy of PORSCHE OF NORTH AMERICA, INC.
  2. Unscrew the two fastening screws on the holder and remove the control unit from the holder.
    Fig 2: Unscrewing Fastening Screws & Removing Control Unit For Telephone From Holder (As Of MY 2002)
    G03063547Courtesy of PORSCHE OF NORTH AMERICA, INC.
  3. Disconnect the electrical plug connections.
    Fig 3: Disconnecting Electrical Plug Connections (As Of MY 2002)
    G03063548Courtesy of PORSCHE OF NORTH AMERICA, INC.
scientia non olet · About LEMON Manuals