Installing control unit for the telephone

WARNING: This page does not describe the selected car, but rather 7 other vehicles, including the 2005 Porsche 911, 2004 Porsche 911, 2003 Porsche 911, 2002 Porsche 911, and 2001 Porsche 911. However, it is still accessible from the selected car via links, so may be relevant.

Connect the electrical plug connections on the control unit.

Fig 1: Connecting Electrical Plug Connections On Telephone Control Unit (As Of MY 2002)
Courtesy of PORSCHE OF NORTH AMERICA, INC.
Position control unit on the holder and screw it down with the fastening screws. Tightening torque 10 Nm (7.5 ftlb.).

Fig 2: Positioning Telephone Control Unit On Holder & Screwing Down With Fastening Screws (As Of MY 2002)
Courtesy of PORSCHE OF NORTH AMERICA, INC.
Lay the holder with the control unit on the floorpan and screw it down with the 4 fastening screws.

Fig 3: Installing Holder With Control Unit & Screws (As Of MY 2002)
Courtesy of PORSCHE OF NORTH AMERICA, INC.

Install right front seat. Refer to REMOVING AND INSTALLING FRONT SEAT, - AS OF MY 1996 .