Installing the control module for the antenna

WARNING: This page does not describe the selected car, but rather 7 other vehicles, including the 2005 Porsche 911, 2004 Porsche 911, 2003 Porsche 911, 2002 Porsche 911, and 2001 Porsche 911. However, it is still accessible from the selected car via links, so may be relevant.

Connect the electrical connectors in turn.

Fig 1: Connecting Control Unit For Antenna Electrical Connectors (As Of MY 2003)
Courtesy of PORSCHE OF NORTH AMERICA, INC.
Push the control unit carefully over the interior carpet -B- and position it in the holder -A- .

Fig 2: Positioning Control Unit For Antenna On Holder (As Of MY 2003)
Courtesy of PORSCHE OF NORTH AMERICA, INC.
Fasten the control unit with the clip to the holder.

Fig 3: Fastening Control Unit For Antenna With Clip To Holder (As Of MY 2003)
Courtesy of PORSCHE OF NORTH AMERICA, INC.

Install the right trim under the instrument panel. Refer to REMOVING AND INSTALLING COWL PANEL COVER .