Technical Values
WARNING: This page does not describe the selected car, but rather 9 other vehicles, including the 2013 Porsche 911, 2012 Porsche 911, 2011 Porsche 911, 2010 Porsche 911, and 2009 Porsche 911. However, it is still accessible from the selected car via links, so may be relevant.
| Location | Description | Type | Basic value | Tolerance 1 | Tolerance 2 |
|---|---|---|---|---|---|
| Pulley (aluminum) to crankshaft | Shouldered bolt, M14 x 1.5 - replace bolt and friction plate | Tightening torque | 170 Nm (126 ftlb.) | ||
| Engine carrier to crankcase | External Torx screw, M10 x 80 | Tightening torque | 65 Nm (48 ftlb.) | ||
| Engine carrier to engine mounting | Collar nut, M12 | Tightening torque | 85 Nm (63 ftlb.) |