Subsequent Work

WARNING: This page does not describe the selected car, but rather 9 other vehicles, including the 2013 Porsche 911, 2012 Porsche 911, 2011 Porsche 911, 2010 Porsche 911, and 2009 Porsche 911. However, it is still accessible from the selected car via links, so may be relevant.

Information

Loosen and tighten screws on the component according to specifications.

Install the clutch.
→ 305019 REMOVING AND INSTALLING CLUTCH .
1. 1.1. Centre clutch plate on the flywheel using centering mandrel 9102 , position pressure plate together with ring gear and secure with nine cheese head bolts (hexagon socket, M8 x 45).
  
  Fig 1: Identifying Pressure Plate
  Courtesy of PORSCHE CARS NORTH AMERICA, INC.
2. 1.2. Screw in cheese head bolts evenly and crosswise and tighten to the specified torque. To counter, position toothed segment p201 b on stud.
  → Final tightening: 23 Nm (17 ftlb.)
Remove and install transmission.
→ 343519 REMOVING AND INSTALLING TRANSMISSION .