Subsequent Work

WARNING: This page does not describe the selected car, but rather 9 other vehicles, including the 2013 Porsche 911, 2012 Porsche 911, 2011 Porsche 911, 2010 Porsche 911, and 2009 Porsche 911. However, it is still accessible from the selected car via links, so may be relevant.

Information

Loosen and tighten screws on the component according to specifications.

Information

Loosen and tighten screws on the component according to specifications.

Install the clutch.
→ 305019 REMOVING AND INSTALLING CLUTCH .
1. 1.1. Centre clutch plate with centering mandrel 9102 on flywheel, position pressure plate together with ring gear and fix in place using the nine cheese head bolts (M8 x 40) -1- .
  
  Fig 1: Identifying Pressure Plate
  Courtesy of PORSCHE CARS NORTH AMERICA, INC.
2. 1.2. Screw in cheese head bolts evenly and crosswise and tighten to the specified torque. To counter, position toothed segment p201 b on stud.
  → Final tightening: 23 Nm (17 ftlb.)
Mount transmission.
→ 343527 REMOVING AND MOUNTING TRANSMISSION .
Install engine.
→ 100119 REMOVING AND INSTALLING ENGINE .