LEMON Manuals: Even more car manuals for everyone
Home >> Porsche >> 2016 >> 911 Turbo, 2D Convertible >> Repair and Diagnosis >> External Pages >> Different car >> Section 119 (13 - Engine - CRANKGEAR, Pistons -- CARRERA (997)) >> WM 136019 Removing And Installing Flywheel (Turbo Coupe, Turbo CABRIO, Gt3, Gt2) >> Preliminary Work

Preliminary Work

WARNING: This page does not describe the selected car, but rather 9 other vehicles, including the 2013 Porsche 911, 2012 Porsche 911, 2011 Porsche 911, 2010 Porsche 911, and 2009 Porsche 911. However, it is still accessible from the selected car via links, so may be relevant.
  1. Remove and install transmission.

    → 343519 REMOVING AND INSTALLING TRANSMISSION .

    Information 

    Loosen and tighten screws on the component according to specifications.

    Information 

    Loosen and tighten screws on the component according to specifications.

    Remove the clutch.

    → 305019 REMOVING AND INSTALLING CLUTCH .

scientia non olet · About LEMON Manuals