Technical Values
WARNING: This page does not describe the selected car, but rather 9 other vehicles, including the 2013 Porsche 911, 2012 Porsche 911, 2011 Porsche 911, 2010 Porsche 911, and 2009 Porsche 911. However, it is still accessible from the selected car via links, so may be relevant.
| Location | Description | Type | Basic value | Tolerance 1 | Tolerance 2 |
|---|---|---|---|---|---|
| Flywheel to crankshaft | M10 x 29 - always replace screws | Initial tightening | 25 Nm (19 ftlb.) | ||
| Flywheel to crankshaft | M10 x 29 | Final tightening - torque angle | 120° | ||
| Clutch pressure plate to flywheel | M8 - always replace screw | Initial tightening | 15 Nm (11 ftlb.) | ||
| Clutch pressure plate to flywheel | M8 | Final tightening - torque angle | 45° |