Technical Values
WARNING: This page does not describe the selected car, but rather 9 other vehicles, including the 2013 Porsche 911, 2012 Porsche 911, 2011 Porsche 911, 2010 Porsche 911, and 2009 Porsche 911. However, it is still accessible from the selected car via links, so may be relevant.
| Location | Description | Type | Basic value | Tolerance 1 | Tolerance 2 |
|---|---|---|---|---|---|
| Dual-mass flywheel to crankshaft | M10 - 12.9 | Tightening torque | 85 Nm (63 ftlb.) | ||
| Single-mass flywheel to crankshaft | M10 - 12.9 | Tightening torque | 90 Nm (67 ftlb.) | ||
| Clutch pressure plate to dual-mass flywheel | M8 x 40, tighten crosswise and in several stages | Tightening torque | 23 Nm (17 ftlb.) | ||
| Clutch pressure plate to single-mass flywheel (GT3 RS) | M8 x 45, tighten crosswise and in several stages | Tightening torque | 23 Nm (17 ftlb.) |