LEMON Manuals: Even more car manuals for everyone
Home >> Porsche >> 2016 >> 911 Turbo, 2D Convertible >> Repair and Diagnosis >> External Pages >> Different car >> Section 119 (13 - Engine - CRANKGEAR, Pistons -- CARRERA (997)) >> WM 135919 Removing And Installing Crankshaft Sealing Ring - Flywheel Side - Turbo (Turbo Coupe, Turbo S Coupe, Turbo S Coupe "Ed. 918 SPYDER", Turbo CABRIO, Turbo S CABRIO, Turbo S CABRIO "Ed. 918 SPYDER") >> Subsequent Work

Subsequent Work

WARNING: This page does not describe the selected car, but rather 9 other vehicles, including the 2013 Porsche 911, 2012 Porsche 911, 2011 Porsche 911, 2010 Porsche 911, and 2009 Porsche 911. However, it is still accessible from the selected car via links, so may be relevant.
NOTE: Removing and installing flywheel
  • Leaks
  • Risk of damage to the flywheel and adjacent components

→ Be very careful during removal and installation.

→ Get another person to help because of the weight.

  1. Subsequent work for manual transmission:
    1. 1.1. Install dual-mass flywheel.

      → 136019 REMOVING AND INSTALLING DUAL-MASS FLYWHEEL 

    2. 1.2. Install the clutch.

      → 305019 REMOVING AND INSTALLING CLUTCH

    3. 1.3. Install manual transmission.

      → 343519 REMOVING AND INSTALLING TRANSMISSION

  2. Subsequent work for Porsche Doppelkupplung (PDK):
    1. 2.1. Install flywheel.

      → WM 136019 REMOVING AND INSTALLING FLYWHEEL - PDK TRANSMISSION - TURBO 

    2. 2.2. Install Porsche Doppelkupplung (PDK).

      → 373419 REMOVING AND INSTALLING PORSCHE DOPPELKUPPLUNG (PDK)