Subsequent Work
WARNING: This page does not describe the selected car, but rather 9 other vehicles, including the 2013 Porsche 911, 2012 Porsche 911, 2011 Porsche 911, 2010 Porsche 911, and 2009 Porsche 911. However, it is still accessible from the selected car via links, so may be relevant.
NOTE:
Removing and installing flywheel
- Leaks
- Risk of damage to the flywheel and adjacent components
→ Be very careful during removal and installation.
→ Get another person to help because of the weight.
- Install flywheel.
→ Tightening torque: 85 Nm (63 ftlb.)
Turbo only (not GT2): → Tightening torque: 90 Nm (67 ftlb.)
Information
Loosen and tighten screws on the component according to specifications.
Information
Loosen and tighten screws on the component according to specifications.
- Manual transmission:
Install clutch.
→ 305019 REMOVING AND INSTALLING CLUTCH .
→ Tightening torque: 23 Nm (17 ftlb.)
- Mount transmission.
Manual transmission: → 343527 REMOVING AND MOUNTING TRANSMISSION .
Automatic transmission (997 Turbo only): → 373527 REMOVING AND MOUNTING AUTOMATIC TRANSMISSION .
- Install engine-transmission unit.