LEMON Manuals: Even more car manuals for everyone
Home >> Porsche >> 2016 >> 911 Turbo, 2D Convertible >> Repair and Diagnosis >> External Pages >> Different car >> Section 119 (13 - Engine - CRANKGEAR, Pistons -- CARRERA (997)) >> WM 135919 Removing And Installing Crankshaft Sealing Ring - Flywheel Side (Turbo Coupe, Turbo CABRIO, Gt2) >> Preliminary Work

Preliminary Work

WARNING: This page does not describe the selected car, but rather 9 other vehicles, including the 2013 Porsche 911, 2012 Porsche 911, 2011 Porsche 911, 2010 Porsche 911, and 2009 Porsche 911. However, it is still accessible from the selected car via links, so may be relevant.
  1. Remove engine-transmission unit.

    → 100119 REMOVING AND INSTALLING ENGINE .

  2. Remove transmission.

    Manual transmission:  → 343527 REMOVING AND MOUNTING TRANSMISSION .

    Automatic transmission (997 Turbo only):  → 373527 REMOVING AND MOUNTING AUTOMATIC TRANSMISSION .

    Information 

    Loosen and tighten screws on the component according to specifications.

    Information 

    Loosen and tighten screws on the component according to specifications.

  3. Manual transmission:  Remove clutch.

    → 305019 REMOVING AND INSTALLING CLUTCH

    NOTE: Removing and installing flywheel
    • Leaks
    • Risk of damage to the flywheel and adjacent components

    → Be very careful during removal and installation.

    → Get another person to help because of the weight.

  4. Remove flywheel.