LEMON Manuals: Even more car manuals for everyone
Home >> Porsche >> 2016 >> 911 Turbo, 2D Convertible >> Repair and Diagnosis >> External Pages >> Different car >> Section 119 (13 - Engine - CRANKGEAR, Pistons -- CARRERA (997)) >> WM 134837 Disassembling And Assembling Crankshaft - Gt3 (Gt3, Gt3 RS) >> Preliminary Work

Preliminary Work

WARNING: This page does not describe the selected car, but rather 9 other vehicles, including the 2013 Porsche 911, 2012 Porsche 911, 2011 Porsche 911, 2010 Porsche 911, and 2009 Porsche 911. However, it is still accessible from the selected car via links, so may be relevant.
  1. Remove the engine.

    → 100119 REMOVING AND INSTALLING ENGINE .

  2. Remove the transmission.

    → 343527 REMOVING AND MOUNTING TRANSMISSION .

  3. Disassemble engine down to the crankcase.

    → 100137 DISASSEMBLING AND ASSEMBLING ENGINE .

  4. Remove the crankshaft.

    → 134819 REMOVING AND INSTALLING CRANKSHAFT .