LEMON Manuals: Even more car manuals for everyone
Home >> Porsche >> 2016 >> 911 Turbo, 2D Convertible >> Repair and Diagnosis >> External Pages >> Different car >> Section 119 (13 - Engine - CRANKGEAR, Pistons -- CARRERA (997)) >> WM 134819 Removing And Installing Crankshaft (Turbo Coupe, Turbo CABRIO, Gt3, Gt2, Gt3 RS) >> Subsequent Work

Subsequent Work

WARNING: This page does not describe the selected car, but rather 9 other vehicles, including the 2013 Porsche 911, 2012 Porsche 911, 2011 Porsche 911, 2010 Porsche 911, and 2009 Porsche 911. However, it is still accessible from the selected car via links, so may be relevant.
  1. Install pistons and cylinders.

    → Installation 

  2. Assemble engine - starting with the cylinder housing.

    → Assembling Engine - Starting With Cylinder Housing

  3. Remove the engine from the engine assembly support and set it down on the Master Gear unit lifting platform WE 1206  with the engine support.
  4. Mount the transmission.

    → 343527 REMOVING AND MOUNTING TRANSMISSION .

    Turbo only:  → 373527 REMOVING AND MOUNTING AUTOMATIC TRANSMISSION

  5. Install the engine.

    → Installing Engine .

scientia non olet · About LEMON Manuals