Technical Values
WARNING: This page does not describe the selected car, but rather 9 other vehicles, including the 2013 Porsche 911, 2012 Porsche 911, 2011 Porsche 911, 2010 Porsche 911, and 2009 Porsche 911. However, it is still accessible from the selected car via links, so may be relevant.
| Location |
Description |
Type |
Basic value |
Tolerance 1 |
Tolerance 2 |
| Connecting rod bolts |
M10 x 1.25 x 51 |
Initial tightening |
20 Nm (15 ftlb.) |
|
|
| Connecting rod bolts |
|
Torque angle |
80° |
|
|
| Connecting rod bolt |
M10 x 1.25 x 51; always replace |
Initial tightening |
20 Nm (15 ftlb.) |
|
|
| Connecting rod bolts |
|
Final tightening - torque angle |
80° |
|
|
| Screw plug in piston-pin assembly bore |
M30 x 1.5 |
Tightening torque |
80 Nm (59 ftlb.) |
|
|
| Location |
Description |
Type |
Basic value |
Tolerance 1 |
Tolerance 2 |
| Connecting rod bolts |
M10 x 1.25 x 51 |
Initial tightening |
20 Nm (15 ftlb.) |
|
|
| Connecting rod bolts |
|
Torque angle |
80° |
|
|
| Connecting rod bolt |
M10 x 1.25 x 51; always replace |
Initial tightening |
20 Nm (15 ftlb.) |
|
|
| Connecting rod bolts |
|
Final tightening - torque angle |
80° |
|
|
| Screw plug in piston-pin assembly bore |
M30 x 1.5 |
Tightening torque |
80 Nm (59 ftlb.) |
|
|