Removing Tailpipe Cover - Speedster/Classic

WARNING: This page does not describe the selected car, but rather 9 other vehicles, including the 2013 Porsche 911, 2012 Porsche 911, 2011 Porsche 911, 2010 Porsche 911, and 2009 Porsche 911. However, it is still accessible from the selected car via links, so may be relevant.

CAUTION: Hot components

Risk of burns

→ Let hot components cool down.

→ Wear personal protective gear.

Spray threaded connection and sliding base with anti-rust agent before removing tailpipe cover.
Loosen external Torx screw (M8) -1- on the clamp -2- .
1. 2.1. Open up the clamp slightly.
  
  Fig 1: Identifying Tailpipe Cover Mounting
  Courtesy of PORSCHE CARS NORTH AMERICA, INC.
Pull off tailpipe cover towards the rear.